Problem: Recover

Implement a program that recovers JPEGs from a forensic image, per the below.

This course’s philosophy on academic honesty is best stated as "be reasonable." The course recognizes that interactions with classmates and others can facilitate mastery of the course’s material. However, there remains a line between enlisting the help of another and submitting the work of another. This policy characterizes both sides of that line.

The essence of all work that you submit to this course must be your own. Collaboration on problems is not permitted (unless explicitly stated otherwise) except to the extent that you may ask classmates and others for help so long as that help does not reduce to another doing your work for you. Generally speaking, when asking for help, you may show your code or writing to others, but you may not view theirs, so long as you and they respect this policy’s other constraints. Collaboration on quizzes and tests is not permitted at all. Collaboration on the final project is permitted to the extent prescribed by its specification.

Below are rules of thumb that (inexhaustively) characterize acts that the course considers reasonable and not reasonable. If in doubt as to whether some act is reasonable, do not commit it until you solicit and receive approval in writing from your instructor. If a violation of this policy is suspected and confirmed, your instructor reserves the right to impose local sanctions on top of any disciplinary outcome that may include an unsatisfactory or failing grade for work submitted or for the course itself.

Your work on this problem set will be evaluated along three axes primarily.

To obtain a passing grade in this course, all students must ordinarily submit all assigned problems unless granted an exception in writing by the instructor.

Navigate to your ~/workspace/unit4 directory. For the first time in a while, no big code distro this time, but there is one important file to download. Execute

This file’s somewhat large (about 16 MB), so it may require some time to download depending on the speed of your internet connection! Then unzip that ZIP file, delete it, and the navigate into your newly-created recover directory. If you list the contents of your directory, you should find one file therein:

You’ll be doing all your work for this problem inside of a new file called recover.c.

In anticipation of this problem, we spent the past several days taking photos of people we know, all of which were saved by my digital camera as JPEGs on a memory card. (Okay, it’s possible we actually spent the past several days on Facebook instead.) Unfortunately, we somehow deleted them all! Thankfully, in the computer world, "deleted" tends not to mean "deleted" so much as "forgotten." Even though the camera insists that the card is now blank, we’re pretty sure that’s not quite true. Indeed, we’re hoping (er, expecting!) you can write a program that recovers the photos for us!

Even though JPEGs are more complicated than BMPs, JPEGs have "signatures," patterns of bytes that can distinguish them from other file formats. Specifically, the first three bytes of JPEGs are

from first byte to third byte, left to right. The fourth byte, meanwhile, is either 0xe0, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xee, of 0xef. Put another way, the fourth byte’s first four bits are 1110.

Odds are, if you find this pattern of four bytes on media known to store photos (e.g., my memory card), they demarcate the start of a JPEG. To be fair, you might encounter these patterns on some disk purely by chance, so data recovery isn’t an exact science.

Fortunately, digital cameras tend to store photographs contiguously on memory cards, whereby each photo is stored immediately after the previously taken photo. Accordingly, the start of a JPEG usually demarks the end of another. However, digital cameras often initialize cards with a FAT file system whose "block size" is 512 bytes (B). The implication is that these cameras only write to those cards in units of 512 B. A photo that’s 1 MB (i.e., 1,048,576 B) thus takes up 1048576 ÷ 512 = 2048 "blocks" on a memory card. But so does a photo that’s, say, one byte smaller (i.e., 1,048,575 B)! The wasted space on disk is called "slack space." Forensic investigators often look at slack space for remnants of suspicious data.

The implication of all these details is that you, the investigator, can probably write a program that iterates over a copy of my memory card, looking for JPEGs' signatures. Each time you find a signature, you can open a new file for writing and start filling that file with bytes from my memory card, closing that file only once you encounter another signature. Moreover, rather than read my memory card’s bytes one at a time, you can read 512 of them at a time into a buffer for efficiency’s sake. Thanks to FAT, you can trust that JPEGs' signatures will be "block-aligned." That is, you need only look for those signatures in a block’s first four bytes.

Realize, of course, that JPEGs can span contiguous blocks. Otherwise, no JPEG could be larger than 512 B. But the last byte of a JPEG might not fall at the very end of a block. Recall the possibility of slack space. But not to worry. Because this memory card was brand-new when I started snapping photos, odds are it’d been "zeroed" (i.e., filled with 0s) by the manufacturer, in which case any slack space will be filled with 0s. It’s okay if those trailing 0s end up in the JPEGs you recover; they should still be viewable.

Now, I only have one memory card, but there are a lot of you! And so I’ve gone ahead and created a "forensic image" of the card, storing its contents, byte after byte, in a file called card.raw. So that you don’t waste time iterating over millions of 0s unnecessarily, I’ve only imaged the first few megabytes of the memory card. But you should ultimately find that the image contains 50 JPEGs.

Implement a program called recover that recovers JPEGs from a forensic image.

Your program should behave per the examples below. Assumed that the underlined text is what some user has typed.

Afraid having the staff’s solution would spoil the challenge!

Odds are you’ll want to start by creating a file called recover.c (in the same directory as is card.raw). No need for the CS50 Library, but you will want to declare main in such a way that it supports command-line arguments. (Remember how?)

Keep in mind that you can open card.raw programmatically with fopen, as with the below, provided argv[1] exists.

When executed, your program should recover every one of the JPEGs from card.raw, storing each as a separate file in your current working directory. Your program should number the files it outputs by naming each ###.jpg, where ### is three-digit decimal number from 000 on up. (Befriend sprintf.) You need not try to recover the JPEGs' original names. To check whether the JPEGs your program spit out are correct, simply double-click and take a look! If each photo appears intact, your operation was likely a success!

Odds are, though, the JPEGs that the first draft of your code spits out won’t be correct. (If you open them up and don’t see anything, they’re probably not correct!) Execute the command below to delete all JPEGs in your current working directory.

If you’d rather not be prompted to confirm each deletion, execute the command below instead.

Just be careful with that -f switch, as it "forces" deletion without prompting you.